You are probably the type who changes flooring once every 2 to 5 years and this is something that can't really be avoided, especially if your floors experience a lot of traffic day in and day out. But not all your rooms need to have their floors changed. In fact, you can leave most of them intact.

But the one room that you should take care of probably every 2 years is the bathroom floor. The bathroom floor is probably the one that is stepped on the most and because of all the moisture in the bathroom, it's more than likely to receive more damage than any other room in the house. Here are a few steps you can follow to help you change your bathroom floor.

• Get the right materials – Before you go ahead and bust up your bathroom floor, make sure that you have all the right materials first. More often than not, people buy all the wrong materials without even knowing it. You have to know what every tile and ceramic is made of on the bathroom floor.

More importantly, know the size of the tiles. It is quite common for a bathroom floor to come out all wrong just because you bought the wrong-sized tiles. That leaves you to cutting the tiles smaller and that is just another mistake that is just waiting to happen.

• Get the right adhesive – The main thing that you will change on a bathroom floor is the bathroom tiles. This will often lead you to changing the tiles on the wall as well but that is not always necessary. What this means is that you have to get the right adhesive so that the tiles stay flat and in place.

More often than not, a careless job of placing the tiles will result in a bumpy floor. This leaves the tiles even more prone to cracks and damage. If the adhesive is not right and you use some of it on the bathroom walls, tiles will eventually fall off and that's the last thing you want to happen.

• Lay out the tiles – Again, before you break the tiles on your floor, lay out the new ones on top of them first. This will let you know right then and there if you have the right sized tiles and the right number of tiles for the entire floor. This is a pretty straight forward and simple task and you only need to lay out a few tiles to estimate that you have all the right sized tiles.

• Start from the middle – Once you have the floor all cleaned out of the old tiles, the first thing you want to do is start from the middle of the room. This way, you won't have to end up stepping on the newly laid tiles when you are working your way to the center. The last thing you need is to place pressure on the new tiles on the outer area making it not so leveled with the ones in the center. Move outward toward the walls and you should have an evenly tiled room by the end of the task.